There are currently no product reviews.
Quick site processing. A complete and very useful manual with all details. Thank you!
Quick service response. A useful and very rare service manual with all details. I recomend this service.
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
2-13.HARNESS PROCESSING OF THE HINGE ASSEMBLY (TRV MODEL)
[ASSEMBLING THE HARNESS CLAMP]
Attach the harness clamp to the DP-78 harness. (8P)
â¢ Place a longer harness to the left side. â¢ Place the shortest harness (8P) in the right side to the bottom. â¢ Place the hooking portion of the harness clamp to the right side. â¢ Place the harness clamp in the left of the tie band himeron that ties the three wires. â¢ Insert the DP-78 harness in the internal groove of the harness clamp.
Harness clamp Himeron DP-78 harness
(Left side) Hooking portion (Right side) (8P) (6P) (12P)
[INSTALLING THE HARNESS CLAMP]
Hook the two claws of the harness clamp on the hinge bracket. Then attach it to the shaft of the hinge assembly. Note: â¢ The harness must not be pinched. â¢ The sheet of the FP-152 flexible board must not be peeled over. Shaft Harness clamp
Fix the harness using the harness guide of the hinge assembly.
â¢ While holding the harness clamp, turn the hinge upside down. â¢ While being careful not to twist the harness, insert the longer harness (8P) into the shallow groove and insert the
Longer harness (8P) Two shorter harnesses (6P, 12P)
other harnesses (6P, 12P) to the deeper groove.
Note: â¢ Be sure that the harnesses do not climb over the three ribs of the guide. â¢ Be sure that the harnesses are not pinched between the harness clamp and the shaft.
[ATTACHING THE HINGE COVER (M)]
Attach the hinge cover (M) to the hinge assembly.
â¢ Hold the harness so that the harness must not come out from the groove. â¢ Be careful so that the hinge cover (M) must not contact with the switch of the FP-152 flexible board.
Straight in the direction of attachemnt Hinge cover (M)
[ATTACHING THE HINGE COVER (C)]
Attach the hinge cover (C) to the hinge cover (M).
â¢ While holding the hinge cover (M) so as not to be dropped, turn the hinge cover (C) upside down. â¢ Route the harness inside the cutout of the hinge cover (M). â¢ Attach the hinge cover (C) straight. (Claw hooks at the four positions.) â¢ Make an attempt to move the harness gently at the entrance/exit of the hinge assembly to make sure that the harness can move.
Hinge cover (C)
Note: â¢ Be sure that the harness is not pinched by the hinge cover. â¢ Be sure that the harness can move at the entrance/exit of the hinge assembly.
Hinge cover (M)