There are currently no product reviews.
I needed a service manual as the display on my oscilloscope was very dim. I thought I'd give owner-manuals.com a try, as they advertised a huge number of manuals. Sure enough they had one listed. I bought it hoping it would be useful... actually, I bought it hoping it would be readable! I've had manuals from online sources in the past, and been very disappointed. Not this time! An excellent manual, complete, and very readable. Using it I fixed my 'scope, and as such the manual was an investment that paid off manyfold. Do I have any complaints? One very minor one - The circuit diagrams could have been scanned at a higher resolution, as some of the details were a little difficult to make out - not impossible, just not as easy as my old eyes would like! Overall, I'm very satisfied with my manual, and I will certainly be using this company again. Well done.
I Have looked for this manual for quiet a while now, I have finally found it here. I believe this is the only place they have them in a very nice scan, pages are very clear to read, some of the pages are a bit tilted but overall it is great to have this manual available for purchase. Thanks
This is quiet a rare manual, I Have looked for this manual for quiet a while now, I have finally found it here. I believe this is the only place they have them in a very nice scan, Excellent guide: very clear, enabling us to print readable diagram overall it is great to have this manual available for purchase. This is a complete service manual no pages are missing. Thanks
This SM is quiet scarce and hard to find it is an excellent Service manual, very clear to read and to print schematics and diagrams, Hi quality, Complete manual with no pages missing. I am very pleased with the manual and the fast service I have received. Great place to shop.
Good luck finding you manual...
Quick delivery, the document was usefull, although the copy was i little bit unclear in the details.
Transferring a call
To transfer from the handset to the base unit
You can transfer a call between the handset and base unit without disconnecting the call.
1 Press (INTERCOM) to page the
base unit. The call is put on hold on the handset. After the base unit rings twice, you will be connected automatically. When a person at the base unit answers, you can talk with each other. â€śINTERCOMâ€ť appears on the display of the handset and the INTERCOM lamp on the base unit lights up.
To transfer from the base unit to the handset
1 Press (INTERCOM) to page the handset.
The call is put on hold on the base unit and the handset rings. â€ś** PAGING **â€ť appears on the display of the handset.
2 Press (INTERCOM) on the
handset. â€śINTERCOMâ€ť appears on the display of the handset and the INTERCOM lamp on the base unit lights up.
2 Press (LINE 1) or (LINE 2)
You can talk between the base unit and the handset.
which is flashing on the base unit to talk to the caller with the base unit. The corresponding line button of the base unit lights up.
(LINE 2) (LINE 1)
3 Press (LINE 1) or (LINE 2)
which is flashing on the handset to talk to the caller with the handset. â€śTALKâ€ť appears on the display of the handset.
If no one answers the phone Press (OFF) on the handset.
If no one answers the phone Press (OFF) on the base unit.
Tips â€¢ You can receive an intercom call on the handset even when â€śRINGERâ€ť is set to â€śRINGER OFFâ€ť. â€¢ If you have accidentally pressed (HOLD) in step 1, just press (INTERCOM) and you will get the same result as by pressing (INTERCOM) only.
Tip You can receive an intercom call on the base unit even when the L1 or L2 RINGER LEVEL switch on the base unit is set to OFF. The base unit will ring at a low level.
Having a conference call
Receiving a call while talking
You can talk on two lines at the same time and you can also talk on one line, the handset and the base unit at the same time. If another call comes in while talking, the LINE 1 or LINE 2 button on which another call is coming will flash.
Making another call while talking
You can talk with two parties at the same time using both line 1 and line 2. (Three-way conference)
1 2 3
Press (HOLD). The line in use is put on hold. Press (LINE 1) or (LINE 2), on which another call is coming. Press (CONF) (conference).
1 Press (HOLD) while talking on
one line. The line in use is put on hold.
Now you can talk to both parties. (Three-way conference)
Note If you do not press (HOLD) in step 1, the first line will be disconnected.
2 Press (LINE 1) or (LINE 2),
whichever is not used.
(LINE 2) (LINE 1) (OFF)
To disconnect the lines during a three-way conference To disconnect both lines at the same time, press (OFF).
To disconnect line 1 and talk on line 2 only: Press (LINE 2). To disconnect line 2 and talk on line 1 only: Press (LINE 1).
3 Dial a phone number for the
4 Press (CONF) (conference) after
the second party is connected. â€śCONFERENCEâ€ť appears on the display.
To put the lines on hold during a three-way conference Press (HOLD). Both lines are put on hold.
To resume the conversations on both lines: Press (CONF). To resume the conversation only on one line: Press (LINE 1) or (LINE 2), for the line you want. (The other line is kept on hold.)
Tip During a three-way conference, you cannot use â€ścall waitingâ€ť service even if you press (FLASH/CALL WAITING) or (FLASH).
Now you can talk to both parties.
(LINE 1) (LINE 2) (OFF)
â€“ 11 â€“